p. 96
The status of the interlocks when the unsafe condition was detected is shown in the Failure
Warnings column. The current status of the interlocks is shown in the Current column. This
allows you to check whether the unsafe condition has been cleared since the circuit detected
the failure.
If all of the interlocks are safe and the motion system cannot be activated, check the
Maintenance Operators Display Unit (MODU) at the motion cabinet in the simulator hall for
messages.
Reset Latches
Resets latched conditions to current.
5.12.6
Sim Message Log
This page is selectable from the
tab suite and is used to display critical
software error messages that have been logged by software systems that impact training in
some way.
For example, errors detected during the loading of some or all of the Nav Databases will
impact the ability to perform repositions and select airports/runways etc.
The instructor has visibility of when critical software errors occur that would impact the
training session.
