L-Mark LK-360, User Manual

Page: 48 / 62

Label & Mark Industries Company User’s Manual of LK-360
- 46 -

If you have selectd the label after press [half-cut depth] and the screen
will display as follows:

Adjust half-cut depth of label
Select Cut depth of label and press [Enter], then the screen will display as
follows:
Use [→] or [← ]to make your selection and press [Enter] to finish your label
semi-cutting depth. The cutting depth ascends from -3 to +3.
If you have chosen a semi-depth of +3 but are not satisfactory with the
semi-cutting results, then you may need to replace your cutter assembly.

Adjust full-cut depth
Select Full-cut depth and press [Enter] to finish your full cutting depth setting.
The cutting depth ascends from -3 to +3.
4.2.21 Print Scope
This function is provided to print selected pages in the text.
Cut depth of label
Full-cut depth
half-cut depth of label:
-3 -2 -1 0 1 2 3