L-Mark LK-360 User Manual Download Page 49 | Manualshive

Page: 49 / 62

background image

Label & Mark Industries Company

User’s Manual of LK-360

- 47 -

This setting allows you to print the pages selected by you (blank pages will not be
printed).

When you have finished the ending page number for printing and press [Enter],
the machine will begin to print.
If you do not enter the starting page number, then the default value will be the
number of the page in which the cursor exists; if you do not enter the ending page
number, then the number of the last page will be the default value. That is to say, if
you do not input the starting page number nor the ending page number, then the
machine will print the page in which the cursor exists until the last page of this
document.

4.2.22 Print

After you have made all the settings and input the print contents, this function
enables you to print the contents of all the pages in the current document on the
printing material.
Blank pages will not be printed.
During printing, the screen will display Printing.

4.2.23 Caps lock

Press this button once to alternate between upper case and lower case input
(invalid for Chinese input). The initial setting is English upper case.

Enter the scope of printing

：

Start page:

«
...
47
48
49
50
51
...
»

Summary of Contents for LK-360































































Reviews:

No comments

Related manuals for LK-360

Brand: Bartscher Pages: 25

Brand: Saeco Pages: 28

BLUE LB 1150 PREZIOSA

Brand: LAVAZZA Pages: 80

Brand: Rotel Pages: 105

PerfectCoffee MC05

Brand: Waeco Pages: 68

Brand: DeLonghi Pages: 18

Brand: wacaco Pages: 16

Brand: Saeco Pages: 88

Brand: Camp4 Pages: 44

Vip Line Elizabeth-PL92T

Brand: Lelit Pages: 30

DeLonghi PICCOLO XS

Brand: Nescafe Dolce Gusto Pages: 21

Brand: Gaggia Pages: 4

Brand: Ratio Pages: 21

Brand: Hoshizaki Pages: 88

Brand: Casio Pages: 25

Brand: Caterlite Pages: 40

Brand: Klarstein Pages: 66

Brand: GeekChef Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands