L-Mark LK-360, User Manual

Page: 19 / 62

Label & Mark Industries Company User’s Manual of LK-360
- 17 -
[Attention]
Be sure to feed the front end of the sleeve tube that is soft or has an excessive
deformation between the Ribbon and the print rubber roll.
See that the sleeve tube is properly fed. The pulling stress exerted by the machine
shall not exceed 500G, otherwise the machine may not work properly.
3.Close the protective cover.
2.3.4 Connection of AC power adapter
1.Switch off the power supply.
2.Plug one end of the AC power adapter connection cable into the round socket on
the side of the machine.
3.Plug the other end of the AC power adapter connection cable into an AC power
supply socket.
[Attention]

Never plug AC power adapter cable into data line socket.

Do not connect AC power adapter cable into power supplies other than rated
voltage (100V to 240V), otherwise fire accident or electric shock may result.
2.3.5 Connection of data cable
1.Switch off the power supply.
2.Plug one end of the data cable into the data line socket on the side of the
machine.
3.Plug the other end of the data cable into the serial port on the computer.
4.Switch on the power supply for use, and press
[PC Conn.]
key on the keyboard.
2.3.6 Power switch
Upon power on, the machine will emits a “De---” sound and the following
power-on screen will be displayed. At this time, the cutter dynamo will initialize.