Rigging procedures
7.
Remove the bottom screws of the supporting enclosure.
8.
Link the two enclosures at the rear by pre-tightening a rigging screw on both sides.
This step requires three operators.
Hold the enclosure at the bottom until the rigging plates are secured.
A10i Focus site angle adjustment
A10iFOCUS-LINK can be used to add an inter-element angle of 5° between two A10i Focus.
9.
Link the two enclosures at the front by pre-tightening a rigging screw on both sides.
A10i owner's manual (EN) version 1.0
93
Summary of Contents for A10i
Page 1: ...A10i owner s manual EN ...