Rigging procedures
Flying a radial array with A10i-LIFT
Type of deployment
own radial array
Rigging accessories
A10i Wide/Focus rigging plates
one A10i-LIFT for three enclosures
LA-SLING2T or a bridle (optional)
Ø12 mm shackles WLL 1 t (provided)
Additional accessories
M6x18 rigging screws (provided)
T30 Torx bit
Min number of operators
2
Rigging plates
x2
x2
x2
x2
x2
x2
x2
x2
A10iFOCUS-LINK
Rigging plates
for A10i Focus
A10iFOCUS-
ENDLINK
End rigging plates
for A10i Focus
A10iWIDE-LINK
Rigging plates
for A10i Wide
A10iWIDE-ENDLINK
End rigging plates
for A10i Wide
Risk of falling objects
Verify that no unattached items remain on the product or assembly.
Additional safety with A10i-LIFT
On each enclosure on which A10i-LIFT is secured, secure a DIN580 eye bolt to the dedicated insert to implement
a secondary safety.
Use a shackle and a steel wire rope. Make sure the steel rope is as tensed as possible without bearing the load.
A10i-LIFT quantity and position
Use one A10i-LIFT for up to three enclosures in the array.
Do not leave more than two adjacent enclosures unsupported.
Refer to
APPENDIX A: Authorized congurations with A10i-LIFT
(p.124).
A10i owner's manual (EN) version 1.0
75
Summary of Contents for A10i
Page 1: ...A10i owner s manual EN ...