background image

 

25

Check waveform of  

the recorded data.. 

 

Press the “START/STOP” switch to start recording data. 
Data is successfully recorded if the “MEAS” lamp lights 

up green. 

 
 

 
 
 
 

 
 
 
 
 
 
 
 
 
 

 

The “MEAS” lamp lights out. 
 
 
When data recording is complete, turn OFF the EDS-

400A (or EDS-450A) power and eject the CF card from 
the EDS-400A (or EDS-450A) and insert it in the PC card 
slot. 

 
Collect the recorded data using the Control Software. 

 

Start up the bundled Data Display Software and check 
waveform of the recorded data. If necessary, save the 
recorded data in ASCII format file and conduct desired 

processing with a spreadsheet software, etc.

 

 

 

 
 
 

Insert CF card into the PC card slot. 

Collect the recorded data. 

Complete data recording. 

Start recording data. 

If the “MEAS” lamp is flashing red, it is error. See
“5. TROUBLESHOOTING.” 
Always start recording data with the CF card
inserted in the card slot of the EDS-400A (or EDS-
450A).  
Data is directly written in the CF card. 
 
When repeatedly setting trigger, the EDS-400A (or
EDS-450A) automatically checks free space in the
CF card every time the system is in trigger standby
mode. And at the point when the CF card capacity
becomes not enough to receive data recorded for the
next trigger, the “MEAS” lamp starts flashing. 

Note 

Summary of Contents for EDS-400A









































Reviews: