23
Set CH conditions and
data recording conditions.
Set CH conditions and data recording conditions.
If necessary, conduct zero suppression.
Collect the recorded data with the Control Software.
Start up the bundled Data Display Software and check
waveform of the recorded data. If necessary, save the
recorded data in ASCII format file and conduct desired
processing with a spreadsheet software, etc.
Start recording data.
Display the monitor window
On the PC.
Collect the recorded data.
Complete data recording.
Always start recording data with the CF card installed
in the card slot of the EDS-400A
(or EDS-450A)
. Then,
data is directly written in the CF card.
Note
Check waveform of
the recorded data.