User Guide for the Kyocera K342 Phone
41
2.
Select one of the two lines and press
.
Data Settings
Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
1.
Select
Menu
→
Settings
→
Accessories
→
Com Port Speed
.
2.
Select the speed. The options are:
19.2 kbps
,
115.2 kbps
(default),
230.4 kbps
, and
Other
.
Note:
There may be a higher charge for
making calls using high-speed data in areas
where 1X service is available. Check with your
service provider for details.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
Note:
To purchase a cable, call 800-349-4188
(U.S.A. only), 858-882-1410, or visit
www.kyocera-wireless.com/store
.
1.
Connect the phone to the laptop or PC.
2.
Set the Com speed.
3.
Select
Menu
→
Settings
→
Network
→
Data/Fax Calls
.
4.
Press
to select an option:
–
Voice only
allows only voice calls.
–
Fax
,
next call
or
Data
,
next call
sets the
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
–
Fax
,
until off
or
Data
,
until off
forces the
phone into fax mode or data mode until
the phone is turned off.
Note:
You cannot receive voice calls while the
phone is in data/fax mode.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Note:
Enable TTY only when
using the phone with a TTY device.
1.
Connect the TTY device to the phone.
2.
Enter
from
your keypad.
3.
Press
to select the
TTY
option.
4.
Close the
Information
window by pressing
to select
OK
.
5.
Highlight
TTY On
and press
.
82-G1673-1EN.book Page 41 Tuesday, August 22, 2006 1:23 PM
