Kyocera ECOSYS P7035cdn, Service Manual

Page: 168 / 178

2PR
2-3-8
YC600
31 BMSCNT O PWM Developing sleeve DC Control signal (Magenta)
Connected
to the high
voltage
PWB 1 32 BMMCNT O PWM Developing magnet AC Control signal (Magenta)
33 CLCNT O PWM Cleaning bias control signal
34 T1YCNT O PWM Primary transfer bias control signal (Yellow)
35 T1CCNT O PWM Primary transfer bias control signal (Cyan)
36 T1MCNT O PWM Primary transfer bias control signal (Magenta)
37 T1RREM O 0/3.3 V DC Primary transfer bias (reverse) signal
38 +24V4 O 24 V DC 24 V DC power source
39 +24V4 O 24 V DC 24 V DC power source
40 +24V4 O 24 V DC 24 V DC power source
YC601 1 +5V1 O 5 V DC 5 V DC power source
Connected
to the opera-
tion panel
PWB 2 FPRTS O 0/3.3 V DC Operation panel PWB communication control signal
3 WAKEUP_PNL
KEY O 0/3.3 V DC Operation panel wakeup signal
4 +3.3V1 O 3.3 V DC 3.3 V DC power source
5 FPRSTN O 3.3 V DC Operation panel reset signal
6 FPTXD O 0/3.3 V DC (pulse) Operation panel PWB communication direct signal
7 GND - - Ground
8 FPRXD O 0/3.3 V DC (pulse)
YC602
1 FTHERM1 I Analog Fuser thermistor 1 detection voltage
Connected
to the paper
exit PWB 2 +3.3V2 O 3.3 V DC 3.3 V DC power source
3 FTHERM2 I Analog Fuser thermistor 2 detection voltage
4 EXITPAP I 0/3.3 V DC Paper exit sensor: On/Off
5 ENVETEA I 0/3.3 V DC Fuser pressure change sensor: On/Off
6 GND - - Ground
7 FDFUL I 0/3.3 V DC Paper full sensor: On/Off
8 FEEDOPN I 0/3.3 V DC Front cover open/close switch: On/Off
9 FUFANDRN O 0/12/24 V DC Fuser fan motor 1: Full speed/Half speed/Off
10 +24V1 O 24 V DC 24 V DC power source
11 DUREVDRN O 0/24 V DC Duplex solenoid: On/Off
YC604 1 POLCLK1 O 0/3.3 V DC (pulse) Polygon motor clock signal
Connected
to the poly-
gon motor 2 POLRDYN1
I
0/3.3 V DC Polygon motor ready signal
3 POLONN01 O 0/3.3 V DC Polygon motor: On/Off
4 GND - - Ground
5 +24V3 O 24 V DC 24 V DC power source
YC605 1 +24V3 O 24 V DC 24 V DC power source
Connected
to the fuser
motor 2 GND - - Ground
3 FUMOTREN O 0/3.3 V DC Fuser motor: On/Off
4 FUMOTCLK O 0/3.3 V DC (pulse) Fuser motor clock signal
5 SPEEDSEL O 0/3.3 V DC Fuser motor speed change signal
6 FUMOTRDYN I 0/3.3 V DC Fuser motor ready signal
Connector Pin Signal I/O Voltage Description