Kyocera ECOSYS P7035cdn, Service Manual

Page: 165 / 178

2PR
2-3-5
YC26 1 DLPCLDRN O 0/24 V DC Developing clutch K: On/Off
Connected
to the devel-
oping clutch
K, develop-
ing motor K,
Registration
clutch and
paper feed
clutch 2 +24V3 O 24 V DC 24 V DC power source
3 MOTKREV O 0/3.3 V DC Developing motor K drive switch signal
4 DLPMOTKRDYN I 0/3.3 V DC Developing motor K ready signal
5 SPEEDSEL O 0/3.3 V DC Developing motor K speed selection signal
6 DLPMOTKCLK O 0/3.3 V DC (pulse) Developing motor K clock signal
7 DLPMOTKREN O 0/3.3 V DC Developing motor K: On/Off
8 GND - - Ground
9 +24V3 O 24 V DC 24 V DC power source
10 REGCLDRN O 0/24 V DC Registration clutch: On/Off
11 +24V3 O 24 V DC 24 V DC power source
12 FEDCLDRN O 0/24 V DC Paper feed clutch: On/Off
13 +24V3 O 24 V DC 24 V DC power source
YC27 1 MOTREV O 0/3.3 V DC Developing motor MCY drive switch signal
Connected
to the devel-
oping motor
MCY 2 DLPMOTRDYN I 0/3.3 V DC Developing motor MCY ready signal
3 SPEEDSEL O 0/3.3 V DC Developing motor MCY speed switch signal
4 DLPMOTCLK O 0/3.3 V DC (pulse) Developing motor MCY clock signal
5 DLPMOTREN O 0/3.3 V DC Developing motor MCY: On/Off
6 GND - - Ground
7 +24V3 O 24 V DC 24 V DC power source
YC28 1 LMOTDRN O 0/24 V DC Lift motor: On/Off
Connected
to the lift
motor 2 GND - - Ground
YC31 A1 VDOMP I LVDS APC PWB M video data signal (+)
Connected
to the main
PWB A2 VDOMN I LVDS APC PWB M video data signal (-)
A3 VDOYP I LVDS APC PWB Y video data signal (+)
A4 VDOYN I LVDS APC PWB Y video data signal (-)
A5 GND - - Ground
A6 PDMN O 0/3.3 V DC (pulse) Horizontal synchronization signal
A7 PDYN O 0/3.3 V DC (pulse) Horizontal synchronization signal
A8 GND - - Ground
A9 FPRXD I 0/3.3 V DC Operation panel PWB comunication recive
exchange data signal
A10 FPTXD I 0/3.3 V DC Operation panel PWB communication trnsmit
exchange data signal
A11 FPRSTN I 0/3.3 V DC Operation panel PWB reset signal
A12 +3.3V1 O 3.3 V DC 3.3 V DC power source
A13 SO O 0/3.3 V DC (pulse) Main PWB serial communication data signal
A14 SDIR O 0/3.3 V DC Main PWB communication direction signal
A15 EGIRN O 0/3.3 V DC Engine interrupt signal
A16 +5V1 O 5 V DC 5 V DC power source
A17 +5V1 O 5 V DC 5 V DC power source
A18 GND - - Ground
A19 GND - - Ground
A20 +24V1 O 24 V DC 24 V DC power source
Connector Pin Signal I/O Voltage Description