Kyocera Ecosys M812cidn, Operation Manual

Page: 464 / 526

11-23
Troubleshooting > Responding to Messages
1105
Failed to send via SMB. Check the following settings.
[System Menu / Counter] key > [Function Key
Assignment] > [Menu] > [Store File] > [Quick Setup
Wizard] >
[SMB Client (Transmission)] 5-16
Failed to send the e-mail. Select [Submit] of the SMTP settings on the Command
Center RX. 2-45
Failed to send via FTP. Check the following settings.
[System Menu / Counter] key > [Function Key
Assignment] > [Menu] > [Store File] > [Quick Setup
Wizard] >
[Function Type] 5-18
1106
Failed to send the e-mail. Check the sender address of SMTP on the Command
Center RX. 2-45
1131
Failed to send via FTP. Enable the SSL.
[System Menu / Counter] key > [Function Key
Assignment] > [Menu] > [Report] > [Print] 5-18
1132
Failed to send the e-mail. Check the following of the SMTP server.
•
Is SMTP over SSL available?
• Is the encryption available?
Refer to the
Command
Center RX
User Guide.
Failed to send via FTP. Check the following of the FTP server.
•
Is FTPS available?
• Is the encryption available?
—
2101
Failed to send via SMB. Check the network and SMB settings.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
• Host name and IP address
• Port number
—
Failed to send via FTP. Check the network and FTP settings.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
• Host name and IP address
• Port number
—
Failed to send the e-mail. Check the network and Command Center RX.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
• POP3 server name of the POP3 user
• SMTP server name
2-45
Error
Code Message Corrective Actions Reference
Page