Kyocera Ecosys M812cidn, Operation Manual

Page: 462 / 526

11-21
Troubleshooting > Responding to Messages
U
W
Y
The slit glass
requires cleaning.
- Clean the slit glass using the
cleaning cloth supplied with the
document processor. 10-2
This ID card is
already registered to
another user.
- Your ID card has already been
registered. Change it to another ID
card. -
This memory is not
formatted. This will
be formatted. Are
you sure?
Is the removable memory formatted by
this machine? Perform [Format] on this machine. 7-10
This user account is
locked out.
- Contact administrator.
Job is canceled. Select [End]. -
Toner [C][M][Y][K]
are empty.
- Replace the toner container.
NOTE
If the color toner is empty but the
black toner is remained, the
machine continues printing in black
and white by selecting [Print in
Black and White] of "Color Toner
Empty Action".
10-4
Toner is low.
[C][M][Y][K]
(Replace when
empty.)
- It is almost time to replace the
toner container. Obtain a new toner
container. 10-4
Message Checkpoints Corrective Actions Reference
Page
Unknown Toner
Installed. PC
[C][M][Y][K]
Does the installed toner container's
regional specification match the
machine's? Install the specified container. 10-4
Use MP tray to print
on the following
paper.
- Set paper displayed on the screen
and press [Continue]. -
Message Checkpoints Corrective Actions Reference
Page
Warning low
memory.
- Cannot start the job. Try again
later. -
Message Checkpoints Corrective Actions Reference
Page
You cannot use this
box.
- You cannot use the specified box.
Job is canceled. Select [End]. -
Error Message Checkpoints Corrective Actions Reference
Page