Kyocera ECOSYS M3860idn, Operation Manual

Page: 449 / 483

11-10
Appendix > Character Entry Method
Character Entry Method
To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below.
Entry Screens
Lower-case Letter Entry Screen
NOTE
Keyboard Layout
"QWERTY", "QWERTZ" and "AZERTY" are available as keyboard layouts the same as a PC keyboard. Select the
[
System Menu/Counter ] key, [ Common Settings ] and then [ Keyboard Layout ] to choose the desired layout.
"QWERTY" layout is used here as an example. You may use another layout following the same steps.
No. Display/Key Description
1 Display Displays entered characters.
2 Keyboard Select the character to enter.
3 [ Cancel ] Select to cancel entered characters and return to the screen before
the entry was made.
4 [ < Back ] Select to return to the previous screen.
5 [ OK ] / [ Next > ] Select to save the entered characters and move to the next screen.
6 Enter Key Select to enter a line break.
7 Space Key Select to insert a space.
8 Delete Key Select to delete a character to the left of the cursor.
9 [ Input ] / [ Limit ]
Display
Displays maximum number of characters and the number of
characters entered.
10 Cursor Key Select to move the cursor on the display.
11 [ A/a ] / [ a/A ] Select to switch between upper case and lower case.
12 [ ABC ] / [ Symbol ] Select the characters that are entered. To enter symbols or numbers,
select [
Symbol ].
Input:
Limit:
< Back Next > Cancel
Add - Name
p o i t r q
l
u y e w
k g f a j h d s
. v c @ x z
Abc
Del.
3
32
A /a
m n b
ABC
1
2
3 5
11 10 8
7
6
9 12
4