Kyocera EcoLAN 2000E User Manual Download Page 74

Page: 74 / 125

Macintosh Configuration 6-9

• Download- enables the user to download fonts to the printer.

• Send File- enables the user to send a file directly from the utility to the printer.

• General- offers a variety of network and other configuration options which are

explained in the following section.

6.5.1 Network and Other Configuration Options

The General Printer Options in the FS-Series Utility govern the network and other
features of the FS-Series printers. Selecting the General button from the FS-Series
Utility main window displays the following screen:

The functions offered on this screen are described below:

• Reset Printer- issues a reset command to the printer.

• Rename Printer- enables the user to rename the AppleTalk printer name. This

change will effect the printer name as it appears in the FS-Series Utility and on the
Network Status page under AppleTalk Printer Name.

Cover-Preface.book Page 9 Wednesday, August 19, 1998 11:57 AM

Summary of Contents for EcoLAN 2000E






























































































































Search results

Summary of Contents for EcoLAN 2000E

Reviews:

Related manuals for EcoLAN 2000E

Brands by name

Popular brands

Kyocera EcoLAN 2000E, User Manual

Search results

Summary of Contents for EcoLAN 2000E

Reviews:

Related manuals for EcoLAN 2000E

Brands by name

Popular brands