Kyocera EcoLAN 2000E User Manual Download Page 110

Page: 110 / 125

Additional Printing & Configuration Options 8-10

8.4.3 Drag and Drop Method

You can also use the "drag and drop" method of printing files from Netscape. For
example, to print a file on your EcoLAN 2000E from Netscape (must be Netscape 2.0
or greater), do the following:

Type: ftp://port1@<destination server IP address>

Click and hold on the file that is on your system and drag it to your IP browser’s
window.

Click on OK to upload file.

The selected file is now sent to the printer.

Note:

FTP printing does not support selecting multiple file names.

Only one person can be logged on to a port at any particular time.

8.4.4 FTP Client

To print from a FTP Client, do the following:

Type: ftp <destination server ID>

Type: port1 (login using username of port number)

Type: put <filename>

The selected file is now sent to the printer.

Cover-Preface.book Page 10 Wednesday, August 19, 1998 11:57 AM

Summary of Contents for EcoLAN 2000E






























































































































Search results

Summary of Contents for EcoLAN 2000E

Reviews:

Related manuals for EcoLAN 2000E

Brands by name

Popular brands

Kyocera EcoLAN 2000E, User Manual

Search results

Summary of Contents for EcoLAN 2000E

Reviews:

Related manuals for EcoLAN 2000E

Brands by name

Popular brands