UNIX Configuration 7-12
6.
Enter remote host name: type host name entered in printcap for EcoLAN 2000E.
For example, type: lprprinter
7.
Confirm the information you have entered. Type: Y
8.
Confirm the preceding connection as your system default. Type: Y
9.
Enter another printer name or quit setup. Type: Q
10. Do you want to start the remote daemon now? Type: Y
11. Using a line editor of your choice, edit the /etc/printcap file by changing the
:rp= entry to PORT1. For example,
printer1:\
:lp=:\ (used to specify the device name for a local printer; this field must be
empty)
:rm=lprprinter:\ (remote machine name or network name of the print server)
:rp=PORT1:\ (remote printer name or the name of the print server)
:sd=/usr/spool/lpd/printer1: (name of the spool directory on the client)
7.3.8 Setting Up System V Release 4 and Solaris 2.X to Use lpd
If your system recognizes the LPSYSTEM command, you can use lpd. Another option
is the admintool if your system supports it.
LPSYSTEM Installation
Use the following procedures to install LPSYSTEM:
Note:
The following must be executed from the Bourne Shell. Type: SH ENTER to
enter the Bourne Shell program.
1.
lpsystem -t bsd <IP_address_of_EcoLAN 2000E>
Enter EcoLAN 2000E host name in /etc/hosts file. Your system may want its IP
address instead of the remote host name.
2.
lpadmin -p <local printername> -s <remote host name or IP address>!PORT1
Note:
There is no space after the remote host name.
3.
Enable <local printername>
4.
Accept <local printername>
Cover-Preface.book Page 12 Wednesday, August 19, 1998 11:57 AM
