manualshive.com logo in svg

Kyocera DCC 2526, Operation Manual

The Triumph Adler DCC 2526 is a high-quality office printer that provides exceptional performance and reliability. To maximize your experience with this product, make sure to download the Instruction Handbook Manual from manualshive.com. This manual is available for free download, offering detailed instructions and valuable tips for optimal usage.

Share
Download
background image

Section 2  Fax Operation (Basic Use)

2-21

The address book searches for the name of the other party as it is registered under 
a one-touch key, group dial key, program key or chain dial key and will dial the 
corresponding fax number(s) upon command. This function is extremely useful 
when a large number of fax numbers have been registered.

*  In order to use the address book, it is necessary that you register a name for the 

other party (or the group or program name) during registration of the one-touch 
key, group dial key, program key or chain dial key.

*  The directory may also be used during registration of program keys, group dial 

keys, Fax Forwarding, and F-Code Relay Boxes, as well as for entering the fax 
number of the other party in each of the other various types of fax 
communication available in this fax.

Searching for a Destination with the 
Address Book

Address book searches are performed using the first character of 
the name as it is registered under the one-touch key, group dial 
key, program key or chain dial key. If the first 3 characters of any 
two destinations are the same, those names will be displayed in the 
numerical order of the abbreviated number.

z

 Search order

The search order is as follows with the order of precedence shown 
from left to right.
English Alphabet [A - Z]  

J

 Numerals [0 - 9]  

J

 Symbols

*  The characters and symbols for display as well as for searching 

will differ depending upon the language being used. 
Refer to “Character Input Screens” on page 10-2.

How Do I Find a Destination in the 
Address Book?

[Ex.]  To search for a destination that is registered with a first 
letter of “A” and then transmit documents to that destination

*  Prior to operation, check the message display to make sure that 

the touch panel is in the initial mode for fax operation. (Refer to 
“What is the “Initial Mode”?” on page 1-11.)

*  If you want to cancel the procedure part way through, press the 

Reset key.

Set the documents you want to transmit.

If you want to change the transmission conditions, such 
as the resolution and contrast, press the “TX setting” key. 
If you do NOT want to change the current conditions, go 
directly to step 5.

Press the key that corresponds to the desired item and 
change the information as desired. (To change each 
transmission condition, refer to pages 2-3 and 2-4.)

Once you are finished changing transmission conditions, 
press the “Address book” key and go directly to step 6.

(inch)

(metric)

Dialing the Destination Using the Address Book  (Address Book)

1

2

3

4

Summary of Contents for DCC 2526









































































































































































































Reviews:

No comments

Related manuals for DCC 2526

Datecs EP-60 Programmer'S Manual preview
EP-60
Brand: Datecs Pages: 29
Radio Shack DMP-200 Operation Manual preview
DMP-200
Brand: Radio Shack Pages: 62
Variquest Perfecta 3600STP Assembly Instructions Manual preview
Perfecta 3600STP
Brand: Variquest Pages: 12
Variquest Perfecta 3600STP User Manual preview
Perfecta 3600STP
Brand: Variquest Pages: 231
Variquest Awards Maker 400 Instructions preview
Awards Maker 400
Brand: Variquest Pages: 4
Oki B8300 User Manual preview
B8300
Brand: Oki Pages: 95
AstroJet M1DX Operator'S Manual preview
M1DX
Brand: AstroJet Pages: 97
A&D AD-8127 Instruction Manual preview
AD-8127
Brand: A&D Pages: 31
Xerox 490ST - Document Centre B/W Laser Printer System Administration Manual preview
490ST - Document Centre B/W Laser Printer
Brand: Xerox Pages: 322
Kyocera ECOSYS FS-6530MFP Specfications preview
ECOSYS FS-6530MFP
Brand: Kyocera Pages: 2
Graphic Products DuraLabel 4 User Manual preview
DuraLabel 4
Brand: Graphic Products Pages: 28
Oki Executive Series 3037 User Manual preview
Executive Series 3037
Brand: Oki Pages: 546
DNP DP-DS80D Startup Manual preview
DP-DS80D
Brand: DNP Pages: 33
Konica Minolta MS6000 MKII User Manual preview
MS6000 MKII
Brand: Konica Minolta Pages: 102
Lexmark C925 User Manual preview
C925
Brand: Lexmark Pages: 221
Lexmark Optra W810 Service Manual preview
Optra W810
Brand: Lexmark Pages: 489
Canon PIXMA E300 series Getting Started preview
PIXMA E300 series
Brand: Canon Pages: 28
Canon MultiPASS F60 Basic Manual preview
MultiPASS F60
Brand: Canon Pages: 115

Brands by name

Popular brands

Load more brands