Kyocera Ai5050 Instruction Handbook Manual Download

Page: 36 / 38

CPU ...............................................PowerPC 403 (50 MHz)

Printing Speed..............................40 ppm unit: 40 pages/min. (A4), 50 ppm unit: 50 pages/min. (A4)

Resolution ....................................600 dpi x 600 dpi

Maximum Paper Size ...................A3

RAM ...............................................16 MB installed

Interface ........................................10Base-T/100Base-TX

System Requirements (Client) ....IBM PC/AT or compatible

OS: Windows 95, Windows 98, Windows NT 4.0

CPU: Windows 95 – Minimum 25 MHz i486SX

(Minimum 90 MHz Pentium recommended)

Windows 98 – Minimum 66 MHz i486DX

(Minimum 90 MHz Pentium recommended)

Windows NT 4.0 – Minimum 25 MHz i486SX

(Minimum 90 MHz Pentium recommended)

RAM: Windows 95 – Minimum 8 MB

(Minimum 16 MB recommended)

Windows 98 – Minimum 16 MB (Minimum 32 MB recommended)

Windows NT 4.0 – Minimum 16 MB (Minimum 32 MB recommended)

Free hard disk space: Minimum 10 MB

Floppy disk drive: 3.5" (1.44 MB)

CD-ROM drive: 1 drive

Printer port: 10Base-T or 100Base-TX

Macintosh

OS: System 7.5 or later, Mac OS 8.x (with LaserWriter 8 installed)

CPU: Minimum 25 MHz 68040 processor

RAM: Minimum 16 MB

Free hard disk space: Minimum 10 MB

Floppy disk drive: 3.5" (1.44 MB)

CD-ROM drive: 1 drive

Printer port: 10Base-T or 100Base-TX

System Requirements (Server)...IBM PC/AT or compatible

OS: Windows NT 4.0 Server or Workstation

CPU: Minimum 166 MHz Pentium

RAM: Minimum 32 MB

Free hard disk space: Minimum 2 GB

Floppy disk drive: 3.5" (1.44 MB)

CD-ROM drive: 1 drive

Printer port: 10Base-T or 100Base-TX

Printing Language .......................PCL5e, PostScript Level 2

Acceptable Fonts .........................Intelli: 35 fonts, TrueType: 10 fonts, Type 1: 35 fonts

* Specifications are subject to change without notice.

Specifications

Summary of Contents for Ai5050







































Search results

Summary of Contents for Ai5050

Reviews:

Related manuals for Ai5050

Brands by name

Popular brands

Kyocera Ai5050, Instruction Handbook Manual

Search results

Summary of Contents for Ai5050

Reviews:

Related manuals for Ai5050

Brands by name

Popular brands