KYMCO XCITING 500, Service Manual

Page: 256 / 349

14.STEERING HANDLEBAR/FRONT WHEEL/
FRONT SHOCK ABSORBER
14-26
XCITING 500
Install the lock washer aligning its tab into
the groove on the steering stem.
Install the steering stem lock nut.
Hold the steering stem top thread and tighten
the steering stem lock nut to the specified
torque.
Special tool: Long socket wrench F007
Torque: 45 N•m (4.5 kgf•m, 32 lbf•ft)
Make sure that the steering stem moves
smoothly without play or binding.
Install the handle post to the steering stem
and front forks.
Install the washer and nut.
Tighten the handle post nut to the specified
torque.
Special tool: Long socket wrench E015
Torque: 62 N•m (6.2 kgf•m, 45 lbf•ft)
Install the brake hose clamp and tighten the
bolts securely.
Route the brake hoses and wires properly
(page 1-12).
Lock Washer
Lock Nut
Nut
Washer
Clamp Bolts