KYMCO XCITING 500, Service Manual

Page: 74 / 349

3
. INSPECTION/ADJUSTMENT
3-21
XCITING 500
ADJUSTMENT
Place the scooter on its center stand.
Release the parking brake lever lock.
Pull up the parking brake lever until 1 notch.
Loosen the lock nut.
Turn the adjust bolt until you feel resistance
when turn the rear wheel by your hand.
Hold the adjust bolt and tighten the lock nut
securely.
Release the parking brake lever.
Make sure the rear wheel turns smoothly.
Pull the parking brake lever slowly and check
the lever stroke.
Standard: 3
－
6 notches
All stroke: 9 notches
If there is out of specification, adjust again.
HEADLIGHT AIM
Place the scooter on a level surface.
Adjust the headlight beam vertically by
turning the vertical beam adjuster.
A clockwise rotation moves the beam up and
counterclockwise rotation moves the beam
down.
Adjust the headlight beam horizontally by
turning the horizontal beam adjuster.
A clockwise rotation moves the beam toward
the right side of the rider.
Lock Nut Adjust Bolt
Vertically Adjusting Screw
Horizontally Adjusting Screw
Adjust the headlight beam as specified
by local laws and regulations.
＊