KYMCO Super 8 50, Service Manual

Page: 8 / 185

1
. GENERAL INFORMATION
1-7
SUPER 8 50

After clamping, check each wire to make
sure it is secure.
.

Do not squeeze wires against the weld or
its clamp

After clamping, check each harness to
make sure that it is not interfering with any
moving or sliding parts.

When fixing the wire harnesses, do not
make it contact the parts which will
generate high heat.

Route wire harnesses to avoid sharp edges
or corners. Avoid the projected ends of
bolts and screws.

Route wire harnesses passing through the
side of bolts and screws. Avoid the
projected ends of bolts and screws.
No Contact !