KYMCO 125 MOVIE S INJECTION, Manual

Page: 1 / 213

PREFACE
This Service Manual describes the
technical features and servicing
procedures for the KYMCO MOVIE
125.
Section 1 contains the precautions for
all operations stated in this manual.
Read them carefully before starting any
operation.
Section 2 is the removal/installation
procedures for the frame covers which
are subject to higher removal/installation
frequency during maintenance and
servicing operations.
Section 3 describes the inspection/
adjustment procedures, safety rules and
service information for each part,
starting from periodic maintenance.
Sections 4 through 19 give instructions
for disassembly, assembly and
inspection of engine, chassis frame and
electrical equipment.
Most sections start with an assembly or
system illustration and troubleshooting
for the section. The subsequent pages
give detailed procedures for the section.
KWANG YANG MOTOR CO., LTD.
OVERSEAS SALES DEPARTMENT
OVERSEAS SERVICE SECTION
TABLE OF CONTENTS
GENERAL INFORMATION
1
FRAME COVERS/EXHAUST MUFFLER
2
INSPECTION/ADJUSTMENT
3
LUBRICATION SYSTEM
4
FUEL SYSTEM
5
ENGINE REMOVAL/INSTALLATION
6
CYLINDER HEAD/VALVES
7
CYLINDER/PISTON
8
DRIVE AND DRIVEN PULLEYS/KICK
STARTER
9
FINAL REDUCTION
10
CRANKCASE/CRANKSHAFT
11
FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION 12
REAR WHEEL /REAR BRAKE /REAR
SUSPENSION
13
BATTERY/CHARGING SYSTEM/A.C.
GENERATOR
14
IGNITION SYSTEM
15
STARTING SYSTEM
16
LIGHTS/ INSTRUMENTS/SWITCHES
17
EVAPORATIVE EMISSION CONTROL
SYSTEM
18
EXHAUST EMISSION CONTROL
SYSTEM
19
The information and contents
included in this manual may be
different from the motorcycle in case
specifications are changed.
CHASSIS
CONTRO
EQUIPMENT
ENGINE