KYLAND Technology KIEN3016M, User Manual

Page: 17 / 80

Chapter Two Performance Specifications
-7-
2.2
Service Interface
1
．
KIEN3016M offers 16 RJ45 ports of 10Base-T/100Base-TX, and KIEN3024M
offers 24 RJ45 ports of 10Base-T/100Base-TX. Each RJ45 port is adaptive.
KIEN3016M also offers 0 to 4 fiber ports of 100Base-FX and KIEN3024M offers
0 to 2 fiber ports of 100Base-FX. The throughout of each fiber port is max
100Mbps.
2
．
Comply with IEEE802.3/802.U/802.3X.
3
．
RJ45 port is adaptive to half-duplex or full-duplex mode. The fiber port is
enforced to full-duplex mode.
4
．
RJ45 port is adaptive to 10/100M and supports for auto MDI/MDI-X connection.
Transmission distance is less than 100m.
5
．
Indicator of RJ45
：
yellow for rate, ON for 100M, OFF for 10M
Green for link status, ON for active connection, BLINK for active network, OFF
for no connection.
2.3
Service Functions
offer such service functions as following
：
1
．
LED Indicator
The LEDs of the front panel indicate the port status correctly including transmission
rate, link status and system status.
2
．
Layer-2 Switching
Switches work in two ways: Cut-Through and Store-and-Forward. In Cut-Through, a
data packet is immediately relayed further after detecting the target address; in
Store-and-Forward, a data packet is first read-in completely and checked for errors
before the switch relays the s ame.
KIEN3016M and KIEN3024M employ
Store-and-Forward that is a switching mode widely used.
3
．
VLAN
The network can be divided into several VLANs, based on port, through which
the users in one VLAN can communicate each other. The VLAN of
KIEN3016M/3024M conform to IEEE802.1Q and can realize the communication