Kverneland Qualidisc Farmer User Manual Download

Page: 28 / 71

Safety

Unhitching

Hydraulic system

The hydraulic system is pressurised.

When connecting the hydraulic system:



Ensure that the tractor/machine assembly are not pressurised.



Connect the hydraulic system, following the



instructions in the user manual.



Colour code sockets, so as to prevent incorrect connections
(inverting functions could cause an accident).

Before any intervention on the hydraulic system



Block the folding extensions hydraulically controlled accessories in
their rest position.



Reduce the pressure.



Stop the tractor engine.

Other instructions

Observation of instructions

In addition to the instructions listed above, always obey:

•

accident prevention instructions,

•

generally recognised safety regulations, occupational health
requirements and road traffic regulations,

•

the notes given in this user manual,

•

instructions for use, maintenance and servicing.

DANGER

High risk of injury when uncoupling the machine.

To prevent any danger:



Immobilize the tractor.



Never position yourself between the tractor and the machine
during uncoupling.



Operate the tractor hydraulic lift slowly and carefully.



Ensure that the machine is on flat and sufficiently stable
ground.



Connect or disconnect the hydraulic connectors to/from the
tractor hydraulic system only when the tractor/machine
assembly is no longer pressurized.

Summary of Contents for Qualidisc Farmer








































































Search results

Summary of Contents for Qualidisc Farmer

Reviews:

Related manuals for Qualidisc Farmer

Brands by name

Popular brands

Kverneland Qualidisc Farmer, User Manual

Search results

Summary of Contents for Qualidisc Farmer

Reviews:

Related manuals for Qualidisc Farmer

Brands by name

Popular brands