Kverneland Qualidisc Farmer User Manual Download

Page: 30 / 71

Receipt and assembly

Attachment by

bracket



For the tightening torques, refer to section "Couples de serrage

visserie standard" to page 50



Symmetrically present the roller(s) at the rear of the machine.



Assemble the brackets.



Bolt the brackets without tightening to the recommended torque.



Check that the roller(s) is (are) aligned with the chassis, with a 20

(

”)

gap in the centre.



Tighten the nuts A until the tube of the roller touches the flat of the
roller arms.



Tighten the nuts

to the recommended torque.



Lastly, tighten the nuts

to the recommended torque.



Check all the tightening torques.

Repositioning the

deflectors

Folding models



Position the 4 screws

on the rear row of discs.



Tighten the nuts (Refer to section Standard tightening torques
page 60).

Summary of Contents for Qualidisc Farmer








































































Search results

Summary of Contents for Qualidisc Farmer

Reviews:

Related manuals for Qualidisc Farmer

Brands by name

Popular brands

Kverneland Qualidisc Farmer, User Manual

Search results

Summary of Contents for Qualidisc Farmer

Reviews:

Related manuals for Qualidisc Farmer

Brands by name

Popular brands