Adjustments
47
Actiflex roller
Configuration with
the levelling blades
Use this configuration if you want:
•
A levelled, fine tilth finish.
•
To sow immediately after harrowing.
Configuration without
the levelling blades
Introduction
Use this configuration if:
•
You want a coarser level and surface finish in order to avoid any
risk of surface breakdown.
•
You are working in the autumn and you want to sow in the spring.
•
You are not planning to sow for a long time.
Dismantle the
levelling blade rail
Loosen the nuts
A
and
B
on each mounting (between 3 and 6
mountings depending on the width).
Remove the supports
Raise the
levelling blade rail
Put the mountings back in their position.
Centre the levelling blades with respect to the rings.
Tighten the nuts
A
and
B
on each mounting.
\
CAUTION
No reverse gear with the roller in contact with the soil.
Do not reverse while the roller is in contact with the ground. This
could damage the blades, as there is no safety mechanism.
A
B
Summary of Contents for Qualidisc Farmer
