Kverneland Qualidisc Farmer User Manual Download

Page: 50 / 71

Unhitching

Storing your fixed machine



Position the machine on a stable and level surface.



Disconnect the road signals kit connector (if fitted).



Unhitch the machine.

Storing your folding machine

In unfolded position

Storing your machine in the unfolded position ensures maximum

stability.



Unfold the chassis.



Set the machine on a flat, stable surface.



Disconnect the hydraulic hoses.



Disconnect the road signals kit connector (if fitted).



Unhitch the machine.



Apply grease on the jack rods to prevent corrosion.

In the folded position

DANGER

Respect of safety instructions

Failure to respect the safety instructions may cause serious injury
or even death. Refer to Chapter Safety, page 5.

WARNING

There is a serious risk of injury when unhitching the machine.

To prevent any danger:



Immobilize the tractor.



Ensure that the machine is on flat and sufficiently stable
ground.



Do not stand between the tractor and the machine.



Actuate the hydraulic lift slowly and carefully.

DANGER

No one should stand close to the tractor’s controls during

unhitching.

WARNING

•

Never let go of the support legs when they are in the unlocked
position. You could be injured.

•

When you’re underneath the machine, be careful not to bump
into something.

Summary of Contents for Qualidisc Farmer








































































Search results

Summary of Contents for Qualidisc Farmer

Reviews:

Related manuals for Qualidisc Farmer

Brands by name

Popular brands

Kverneland Qualidisc Farmer, User Manual

Search results

Summary of Contents for Qualidisc Farmer

Reviews:

Related manuals for Qualidisc Farmer

Brands by name

Popular brands