2.3. Installation of the System
Please follow these rules during the installation:
1. Do not connect the device to power supply during the installation.
2. Mount the system only to mounting point that is strong, secure and away from places where non-
authorised person could get an access to.
3. Always make sure the system is properly tighten down and that it cannot get loose and move as a
result of sound vibrations, cable pull or similar.
4. Always use a safety rope.
5. Ensure that all the cables have enough leverage just in case they get caught.
6. Ensure that the system is placed at least 20cm away from walls or any other objects including
drapes etc.
7. Ensure that the system is placed well away from any heat sources including spotlights, moving
heads, radiators, etc. Make sure there is a sufficient air-flow around the laser system.
8. It is essential that the fan openings are never covered during the laser operation.
9. Always follow the Laser Safety Regulations of respective country where the laser is being used.
The manufacturer is not liable for damages or a injury caused by improper installation of
the system.
The installation should be carried by a qualified installer who should follow the Laser
Safety Regulations of respective country.
!
Kvant Lasers s.r.o.
Burstberry - 1
Page 7 of 32
