8.1. Technical Specification Burstberry
KVANT Burstberry – full colour, semiconductor diode laser system
Total Optical Power (installed): 2.1W
Total Optical Power (guaranteed): 2W*
Maximum Output Power: 2.2W
*Due to Advanced Optical Correction technology used in our laser systems the optical power output of
each laser colour within the system may slightly differ from the specification of respective laser
module(s) installed. This does not affect the guaranteed total power output.
Colour Beam size Beam divergence
Wavelength Maximum Output
Red
3.5×3.5mm <0.4mrad (full angle)
637nm
300mW
Green
5×5mm
<0.35x0.1mrad (full angle)
520nm
700mW
Blue
5×5mm
<0.45x0.1mrad (full angle)
445nm
1200mW
NOHD (Nominal Ocular Hazard Distance for guaranteed power output): 306m
Modulation: 0-5V analog, up to 50kHz
Module cooling: TEC
Scanning System:
ScannerMAX 506 Compact, up to 27kpps@8°, max. scanning angle 60° on both axes
White LED Blinder:
Optical Power: 3W
Control signal: Ethernet, DMX/ArtNet, SD card (via inbuilt FB4 control interface)
Power requirements: 100-240V/50Hz (±5%)
Consumption: 250VA/100-240V
Operation temperature: 10-40°C
Dimensions (WxHxL): 161 × 161 × 300mm
Weight: 3.8kg
Laser safety features: Keyed interlock, emission delay, magnetic interlock, scan-fail safety, V-RAD 506
mechanical shutter | reaction time <20ms, adjustable aperture masking plate.
This laser system fully complies with the latest EN 60825-1, FDA regulations and TUV Laser Safety.
Kvant Lasers s.r.o.
Burstberry - 1
Page 32 of 32
