5.3. Rear View
1.
Mains power INPUT/OUTPUT.
Use supplied Neutrik powerCON TRUE1 power cable to connect
the laser system to mains power supply using the INPUT connector. The OUTPUT connector is
used to daisy chain power between multiple laser systems for quick and easy installation.
2.
Power ON indicator.
The powerCON TRUE1 is a connector with breaking capacity (CBC), i.e. it
can be connected or disconnected under load or live.
3.
Safety key switch.
The Safety key must be inserted and turned to ON position in order to enable
the system to operate.
4.
E-STOP Remote connector, Interlock status indicator and User Interlock.
In order to use the
laser system, the Interlock must be closed circuit. This is done by connecting the Emergency
STOP Remote to the XLR INPUT Remote socket on the projector using the supplied cable and
plugging in the User Interlock Connector into the Remote’s XLR “User E-STOP Connector”.
Please note that in most countries it is required by law to have a fully working
Emergency STOP in place for every laser system used. If you use supplied interlock
connector to defeat the safety interlock you must have another method in place to be
able to kill the laser output instantly in case of emergency.
!
Kvant Lasers s.r.o.
Burstberry - 1
Page 23 of 32
