6.1. Beam Alignment
1. Loosen 2 silver bolts that hold down
the colour alignment mechanism cover
and remove the cover.
2. Power up the system as normal.
3. Firstly, it is necessary to align a colour with the longest beam path between the laser module
output and the scanning system in a way so it hits the exact centre of the bottom scanning mirror –
in this case it is the blue laser beam.
Create a blue beam effect (point) and check visually whether the beam hits the exact centre of the
bottom scanning mirror.
If not, follow the diagram below to adjust the beam path accordingly (step 1 on the diagram).
Kvant Lasers s.r.o.
Burstberry - 1
Page 27 of 32
