37
8.6 Measurement-filtering function
Selecting measurement-filtering function stabilizes the measured value displayed on LCD.
In DCV, DCmA function, pressing the
〔
AVG
〕
key causes calculation of the average of the samples. LCD shows
the “AVG” symbol. Repressing the
〔
AVG
〕
key cancels the calculation and the “AVG” symbol disappears.
8.7 Measured Value holding function
Apart from the continuity measurement functions, the reading-hold function can be used to preserve the
current measured value on the upper part of LCD, which consequently doesn’t refresh the measured value.
Pressing the
〔
HOLD
〕
key selects reading-hold mode, and LCD displays “HOLD” symbol. To cancel the
selection, press the
〔
HOLD
〕
key again and the “HOLD” symbol disappears.
Summary of Contents for KM-CAL-907
Page 1: ......
Page 7: ...7 4 Familiar With the Calibrator Figure 1 Entire Graph Figure 2 Measurement Source Terminals ...
Page 75: ...75 ...
Page 76: ...76 ...
