31
7.6 Zero-off function
In any range of DC voltage, DC current functions, pressing the
〔
ZERO
〕
key selects clearing off function, which
initializes the preset source value for the convenience of user to reset source value.
In frequency, pulse output functions, the
〔
ZERO
〕
key is unavailable.
8 Measurement
From the calibrator, you can measure a DC voltage, DC current, frequency, continuity.
Warning
z
In an application where the calibrator is used together with the supplied lead cables for measurement, the
allowable voltage to ground of the input terminals is 60 Vpk maximum. To avoid electrical shock, do NOT
use the calibrator at any voltage exceeding the maximum voltage to ground.
Tips:
z
With
the
〔
HOLD
〕
key, you can hold the measured value.
z
The reading of a measured value is updated differently responding to different measurement function.
LCD shows “ - - - - - “on the upper part when shifting the range. If the input is over ranged, the measured
value on the LCD reads as “oL”.
Summary of Contents for KM-CAL-907
Page 1: ......
Page 7: ...7 4 Familiar With the Calibrator Figure 1 Entire Graph Figure 2 Measurement Source Terminals ...
Page 75: ...75 ...
Page 76: ...76 ...
