15
z
When using the instrument within a temperature range of 0 to 18
°
C or 28 to 50
°
C, add a value based on
the temperature coefficient shown in Chapter 18“Specifications” to the given accuracy rating.
z
When using the instrument at an ambient humidity of 30% or lower, prevent electrostatic charges from
being produced, by using an antistatic mat or any other alternative means.
z
Condensation may occur if you relocate the instrument from places with low temperature and humidity to
places with high temperature and humidity, or if the instrument experiences any sudden temperature
change. In that case, leave the instrument under the given ambient temperature for at least one hour to
ensure that the instrument is free from condensation, before using the instrument.
Installing or Replacing the Batteries
Warning
To avoid electrical shock, always remove the source or measurement lead cables from the object under test,
as well as from the instrument itself before opening battery door.
Caution
z
To avoid the risk of fluid leakage or battery explosion, install batteries with their positive and negative
electrodes correctly positioned.
z
Do not short-circuit the batteries.
z
Do not disassemble or heat the batteries or throw them into fire.
z
When replacing batteries, replace all of the four batteries at the same time with new ones from the same
manufacturer.
z
If the instrument will not be used for a prolonged period, remove the batteries from the instrument.
Summary of Contents for KM-CAL-907
Page 1: ......
Page 7: ...7 4 Familiar With the Calibrator Figure 1 Entire Graph Figure 2 Measurement Source Terminals ...
Page 75: ...75 ...
Page 76: ...76 ...
