FXAlg #735/6: KB3 FX
Algorithm Reference-115
Parameters (KB3 AuxFX):
PAGE 1
PAGE 2
PAGE 3
PAGE 4
In/Out
When set to ÒInÓ, the algorithm is active; when set to ÒOffÓ the algorithm is bypassed.
For the entire algorithm to be active, KB3 FXBus must also be active with its Roto InOut
parameter set to ÒInÓ. To completely bypass the rotary, one or both of the In/Out or Roto
InOut parameters in KB3 FXBus must also be bypassed.
Out Gain
The overall gain or amplitude at the output of the effect.
Lo Gain
The gain or amplitude of the signal passing through the rotating woofer (low frequency
driver. The control is also available in KB3 FXBus.
Hi Gain
The gain or amplitude of the signal passing through the rotating tweeter (high frequency
driver. The control is also available in KB3 FXBus.
For details on the rest of the parameters see the section of this book on FXAlg #733.
In/Out
In or Out
Out Gain
Off, -79.0 to 24.0 dB
Lo Gain
Off, -79.0 to 24.0 dB
Hi Gain
Off, -79.0 to 24.0 dB
Lo Rate
-10.00 to 10.00 Hz
Hi Rate
-10.00 to 10.00 Hz
Lo Size
0 to 250 mm
Hi Size
0 to 250 mm
Lo Trem
0 to 100%
Hi Trem
0 to 100%
Lo Beam W
45.0 to 360.0 deg
Hi Beam W
45.0 to 360.0 deg
LoMicA Pos
-180.0 to 180.0 deg
LoMicB Pos
-180.0 to 180.0 deg
LoMicA Lvl
0 to 100%
LoMicB Lvl
0 to 100%
LoMicA Pan
-100 to 100%
LoMicB Pan
-100 to 100%
HiMicA Pos
-180.0 to 180.0 deg
HiMicB Pos
-180.0 to 180.0 deg
HiMicA Lvl
0 to 100%
HiMicB Lvl
0 to 100%
HiMicA Pan
-100 to 100%
HiMicB Pan
-100 to 100%
LoResonate
0 to 100%
HiResonate
0 to 100%
Lo Res Dly
10 to 2550 samp
Hi Res Dly
10 to 2550 samp
LoResXcurs
0 to 510 samp
HiResXcurs
0 to 510 samp
ResH/LPhs
0.0 to 360.0 deg
