Tube Amp/Distortion/Delay Combinations
Algorithm Reference-105
MD Delay
Adjusts the delay time for the moving delay circuit, which is the center of LFO
excursion.
MD LFOMode
Adjusts the LFO excursion type. In Flange mode, the LFO is optimized for ßange effects
and LFO Dpth adjusts the excursion amount. In ChorTri and ChorTrap modes, the LFO
is optimized for triangle and trapezoidal pitch envelopes respectively, and LFO Dpth
adjusts the amount of chorus detuning. In Delay mode, the LFO is turned off leaving a
basic delay. LFO Rate and LFO Dpth in Delay mode are disabled.
MD LFORate
Adjusts the LFO speed for the moving delay circuit.
MD LFODpth
In Flange LFO mode, this adjusts an arbitrary LFO excursion amount. In ChorTri and
ChorTrap modes, this controls the chorus detune amount. In delay mode, this is
disabled.
MD Fdbk
Adjusts the level of the moving delay circuit output signal fed back into its own input.
Negative values polarity-invert the feedback signal.
Ch Wet/Dry, Fl Wet/Dry
Adjusts the ratio of ßange or chorus signal and the cabinet simulator signal fed to
the output of the algorithm. 0% feeds only the cabinet simulator to the output bypassing
the Þnal chorus or ßange. 100% feeds only the ßange or chorus to the output.
Ch Out Bal, Fl Out Bal
Adjusts the left/right output balance of the chorus or ßange signal. Negative values
balance toward the left while positive values balance toward the right.
