6
3BA00205 • 2020-10-28 • Rev. 5
Ersa i-CON
VARIO 2
Technical data
2.
Technical data
Soldering station i‑CON VARIO 2
Designation
Value
Dimensions approx.
180 mm x 280 mm x 115 mm
Weight
Approx. 6 kg
Voltage
220 – 240 VAC
Mains frequency
50 Hz
Fuse (slow blowing)
3.15 A
Secondary voltage
24 VAC
Maximum short‑term heating power
350 W
Medium power
160 W
Class of protection
I
Permissible ambient temperature
0 – 40 °C
Temperature range (stepless)
150 – 450 °C (50 – 550°C i-TOOL AIR S)
300 – 842 °F (122 – 1020°F i-TOOL AIR S)
Regulating fluctuations in idle state
< ± 2 °C
Ohmic resistance between soldering tip and ground
< 2 Ohm
Leakage voltage soldering tip to ground
< 2 mV
eff
Equipotential bonding
4 mm
Air supply (depending on model)
Internal, blow‑of air 2 – 20 l/min (± 5%),
vacuum up to 700 mbar
Interface on front face
1 x microSD-card
Interface on rear side
Ersa soldering fume extraction, pre‑heating plate IRHP100,
ready signal, standby signal, USB 2.0, equipotential bonding
4 mm bushing
Control technology (tool-dependent)
SENSOTRONIC (PID‑characteristic), RESISTRONIC
Function display
LC‑Display, blue
Supply cable 2 m, PVC, with appliance socket
Single‑button operation via incremental encoder (i‑OP)
Anti‑static surface, especially suitable for use in ESD areas.
Acc. to MIL-SPEC/ESA-Standard
VDE, EMC‑tested
Conformity
Two tools operable at the same time
Connectible soldering and desoldering tools (depending on model):
i‑TOOL, i‑TOOL AIR S, CHIP TOOL, CHIP TOOL VARIO, X‑TOOL VARIO, TECH TOOL, MICRO TOOL,
i‑SET TOOL, i‑TOOL HP
Soldering iron i‑TOOL
Designation
Value
Operating voltage
24 VAC
Maximum heat output
150 W
Mean heating power
80 W
Heating up time to 350 °C / 662 °F
Approx. 10 s
Temperature range
150 – 450 °C
Temperature fluctuations in idle state
Less than ±2 °C/±4 °F
Weight without power cable
Approx. 30 g
Miscellaneous
Power cable 1.5 m, highly flexible, heat resistant, antistatic
Antistatic design acc. to MIL‑SPEC/ESA‑standard
Identification and standby function integrated in the handle
