39
3BA00205 • 2020-10-28 • Rev. 5
Ersa i-CON
VARIO 2
Functional description
6.6
Contrast
Please proceed as follows to adapt the display contrast to your working
environment:
■
Switch on the station and rotate the i‑OP immediately. This activates
the contrast mode:
The buzzer sounds to signalize that the contrast mode is active.
■
Set the desired contrast by turning the i-OP.
■
Confirm your input by pressing the i‑OP.
In the contrast mode the software version, the date and the hardware version of the
controlboard (CB), the powerboards (PB) und and the tools connected to the tool sock
-
ets can be displayed. Activate the contrast mode as described above, click and hold the
i‑OP afterwards. Clicking and holding the i‑OP for a second time closes the display.
