35
3BA00205 • 2020-10-28 • Rev. 5
Ersa i-CON
VARIO 2
Functional description
The second display [Password activation] appears:
■
Enter the password once again and press i‑OP to confirm your entry.
The display [Configuration] appears with the message [PASSWORD LOCK
IS ACTIVE]. The station is now protected.
6.4.5
Changing the password
The password is set in configuration mode. If a password has already been set, the code appears
“hidden”.
If the user would like to change a password, the active password protection must first be revoked by
entering the current password.
After a correct input, the new password can be set. If the numerical input is completed by means
of the PUSH function, a note appears to inform you that the password protection will be activated.
This note should once again inform the operator about the severity of this function. If the function is
interrupted, the previous status will be maintained.
If the operator continues the dialog [>>>], the password needs to be repeated for activation.
If the password was repeated correctly, the station is protected by the code. If the code is entered
incorrectly, you will receive a message stating that the previous condition will be maintained.
The symbol
①
signalizes that the station is protected.
6.4.6
Password forgotten
If you have forgotten your password, this can only be reactivated by the Ersa Service for reasons
of safety. In this case please consult Ersa by stating your address, name, invoice number and serial
number of the soldering station (see type plate). The password protection can also be disabled with
the i‑SET TOOL; see chapter 6.3.1 [i‑SET TOOL]. For this purpose follow the corresponding note in
