Hakko Electronics FP-102 User Manual Download

Page: 1 / 16

High-output, temperature controlled

soldering station

Instruction Manual

●

Thank you for purchasing the FP-102 soldering station. This

high-output, temperature controlled soldering station uses a

composite tip, incorporating heater and sensor functions into

one element. Several process control features unique to the

FP-102 make it applicable to a broad range of soldering ap-

plications.

Please read this manual before operating the FP-102 . Keep

this manual readily accessible for reference.

●

TABLE OF CONTENTS

1. PACKING LIST ...............................................................1

2. SPECIFICATIONS ..........................................................1

3. WARNINGS, CAUTIONS, NOTES AND EXAMPLES .... 2

4. PART NAMES .................................................................3

5. INITIAL SETUP ...............................................................3

6. OPERATION ...................................................................5

7. PARAMETER SETTINGS ............................................... 6

8. MAINTENANCE ..............................................................7

9. ERROR MESSAGES ...................................................... 9

10. TROUBLE SHOOTING GUIDE .................................... 10

11. PARTS LIST ................................................................. 11

12. TIP STYLES .................................................................13

13. WIRING DIAGRAM ....................................................... 15

HEAD OFFICE

4-5, SHIOKUSA 2-CHOME, NANIWA-KU, OSAKA, 556-0024 JAPAN

TEL:+81-6-6561-3225 FAX:+81-6-6561-8466

http://www.hakko.com

AMERICAN HAKKO PRODUCTS, INC.

28920 N. AVENUE WILLIAMS VALENCIA CA 91355, U.S.A.

TEL: (661) 294-0090 FAX: (661) 294-0096

Toll Free (800)88-HAKKO www.hakkousa.com

4 2 5 5 6

2005.10

MA01268JZ051019

13. WIRING DIAGRAM

RED

BLK

WHT

RED

SW2

LED2

LED5

LED3

LED4

SW1

Power switch

Grounding plate

Fuse

P.W.B./switch

P.W.B./connector

P.W.B./temperature

control

Transformer

Summary of Contents for FP-102

















Search results

Summary of Contents for FP-102

Reviews:

Related manuals for FP-102

Brands by name

Popular brands

Hakko Electronics FP-102, Instruction Manual

Search results

Summary of Contents for FP-102

Reviews:

Related manuals for FP-102

Brands by name

Popular brands