DO0281R00
26 / 58
Configuring TAP CURIOUS
◦ Click on the "Configuration" register.
The basic settings for TAP CURIOUS will be displayed. You can also change
certain values:
Device information
The following device information appears in "Device info":
– Serial number of TAP CURIOUS
– Software version
– MAC address
These data are specified by KUNBUS for this device and cannot be changed.
Please have these data to hand if you report a problem to our support.
Setting the connection speed
You can select the connection speed for all ports in the "Config channel 1&2"
menu. The default speed is 100 Mbit.
◦ To change the default, check the "10 Mbit mode" box.
Configuration
You can change the following communication parameters in the "Config TAP"
menu:
– IP address
The IP address ensures that TAP CURIOUS can be clearly identified within a
network. When assigning a new IP address, you should therefore make sure
that it is not being used by another device in the network.
If you use DHCP, you do not need to set the IP address. In this case, TAP
CURIOUS will receive the IP address from the DHCP server.
Filters
