DO0281R00
25 / 58
Check the "Set filter > Negate" box to filter all frames that do not match the
selected Ethernet type.
You can combine the filter with the external input. Do this by checking the "External
input > Yes/No" box.
Check the "External input > Negate" box if the external input has to be "low".
IPv4 Dest. address filter
This is where you can set frames that are transmitted to a particular IP address.
Enter the IP address you require.
Check the "Set filter > Negate" box to filter all frames that are not transmitted to this
IP address.
You can combine the filter with the external input. Do this by checking the "External
input > Yes/No" box.
Check the "External input > Negate" box if the external input has to be "low".
IPv4 Src. address filter
This is where you can set frames that are transmitted from a particular IP address.
Enter the IP address you require.
Check the "Set filter > Negate" box to filter all frames that are not transmitted from
this IP address.
You can combine the filter with the external input. Do this by checking the "External
input > Yes/No" box.
Check the "External input > Negate" box if the external input has to be "low".
Extern Out, LED 0-4
You can set what you want to do with the result of a filter here. You can show that
a filter applies via the filter LEDs or the external output.
To be able to use the configuration settings, they have to be saved.
Example:
You want to filter all frames that are transmitted from the MAC address "C8 3E A7
01 23 45". LED 2 will light up when a frame has been transmitted from MAC
address "C8 3E A7 01 23 45".
◦ In the "Dest. address filter" menu, set value "C8 3E A7 01 23 45".
◦ In the "Dest. address filter" checkbox in the "LED 2" menu, click "set".
For TAP CURIOUS to use your filter settings, they have to be saved.
Saving the configuration
As soon as you have set filter and configuration, you can save the settings so that
they can be used at a later time.
◦ Click on Export.
◦ Enter a file name
◦ Click on OK
Loading an existing configuration
file
If you have already saved a configuration in the web server, you can import this file
to TAP CURIOUS again at any time.
◦ Click on "Import".
◦ Select the file you want.
◦ Click on "OK".
Filters
