DO0281R00
21 / 58
7.2 Setting filters
Requirements:
ü
Wireshark is installed on your PC.
ü
TAP CURIOUS is properly connected.
◦ Open the Network and sharing center on your PC.
◦ Click on "Change adapter settings".
◦ Double-click to open the network connection for your TAP CURIOUS.
◦ Click on "Properties"
◦ Activate the "IPv4" protocol. You need this protocol to configure filter settings
via the web server.
◦ Open Wireshark
◦ Select the network connection for TAP CURIOUS.
ð
TAP CURIOUS will transmit a broadcast frame. You can determine the current
IP address of TAP CURIOUS from this frame. When you start TAP CURIOUS
for the first time, the default IP address is 192.168.0.10.
◦ Click on “Address Resolution Protocol".
◦ Make a note of the TAP CURIOUS IP address.
◦ Enter the IP address into the address line in your browser.
ð
The web server will open.
You can now set the filters you want and configure TAP CURIOUS.
Filters
