| 25
en
manual
N-coder ii
N-coder i
control button
s4t
synergic
initial power
manual
N-coder ii
N-coder i
control button
s4t
synergic
initial power
Mig/MAg
- Setting the SPoT WelDing function
(spot welding)
this function is designed for spot welding of materials and allows setting the
duration of the welding process. the function must be activated using the
control button.
pulz
manual
N-coder ii
control button spot funkction
synergic
Mig/MAg
- Set the point length
press the FuNctioN button and rotate the n-coder i sequentially to set the
point length. the function value is corrected with control n-coder ii.
pulse
point length
manual
N-coder ii
N-coder i
control button spot funkction
synergic
Job MoDe
the function allows saving of user programs. there are 100 free storage posi
-
tions that can be overwritten at will.
Save the user program
press the save button. then use the n-coder to select the position save 1-100
and press save to confirm.
Call up the user program
press the load button. then use the n-coder to select the position save 1-100
and confirm with load.
pulse
double pulse
manual
N-coder ii
load - program recall/initiation
signaling JoB mode
synergic
save - save program
liquid cooling control
liquid
cooling can be activated / deactivated depending on the specific appli
-
cation and the welding torch used. use the control button to select the appro
-
priate request.
pulse
double pulse
manual
N-coder ii
control button
activation
synergic
