| 21
en
MMA
- Setting ARc FoRce function
the function increases the energy supplied to the shortening arc by the
mma method, thereby accelerating the electrode melting and preventing
it from sticking. the function is activated when the arc voltage drops below
approx. 17 v. setting the value determines the possible increase in welding
current. the function is set in the range 0 - 10, which adjusts its intensity. 0 =
off; 10 = maximum. activation is performed by pressing the control n-coder
one after the other.
arc force
N-coder
mma method
MMA
- Setting the AnTi STicK function
(sticking electrode)
the function reduces the welding voltage to 5v when evaluating the short
-
-circuit at the output terminals (when the electrode is glued to the material
to be welded), thus allowing easy removal of the electrode from the ma
-
terial to be welded. the function is automatically activated each time the
machine is switched on.
Tig Dc liFT
- Adjust the welding current
the welding current is set using the control n-coder. activation is performed
by pressing the control n-coder one after the other.
tiG dc liFt
Welding current
N-coder
method switching button
Tig Dc liFT
- Setting the DoWn SloPe function
the function is used for the continuous termination of the welding process.
together with the eNd curreNt function, it prevents crater formation at
the end of the weld when properly adjusted. during the set time, the wel
-
ding current drops to the value of the end current. activation is performed
by pressing the control n-coder one after the other.
Setting of welding parameters
Setting the welding method
the selection and confirmation of the welding method is carried out using the
control button.
MMA
- a method designed for welding with a coated electrode crNi, al, alloys
and steel materials.
TIG LIFT
- the method is designed for welding of crNi and steel materials with
dc current. it also allows soldering.
MIG/MAG
- the method is designed for welding of steel, crNi and al materi
-
als. it also allows soldering cusi.
miG/maG method
tiG liFt method
mma method
MMA
- Welding current setting
the welding current is set using the control n-coder. the „welding current setting“
function must be active for the setting. activation is performed by pressing the
control n-coder one after the other.
Welding current
N-coder
mma method
MMA
- Setting the hoT START function
(easier ignition)
the function allows setting the value of the welding current increase when
the arc is ignited. the function facilitates ignition of the welding arc. the func
-
tion is set in the range of 0 - 10, which sets its intensity. 0 = off; 10 = maximum.
activation is performed by pressing the control n-coder one after the other.
hot start
N-coder
mma method
