22 | en
tiG dc liFt
doWN slope N-coder
method switching button
Tig Dc liFT
- Setting 2-STRoKe function
the function indicates how the welding process is activated. When using
this mode, it is necessary to press the control button during welding to send
a signal to activate the welding process. pressing the control button starts
the welding process and activates the sequence of functions. to activate,
press the control button one after the other.
tiG dc liFt
2-stroke
N-coder
method switching button
2/4 stroke control button
Tig Dc liFT
- Setting 4-STRoKe function
the function indicates how the welding process is activated. When using
this mode, it is necessary to press the control button, which sends a signal to
activate the welding process. the pre-Gas function is then activated, follo
-
wed by start curreNt. When the button is released, the welding process
starts by switching to WeldiNG curreNt and activating other active func
-
tions gradually. to complete the welding process, press the control button
again to activate the doWN slope function and then the eNd curreNt
function. When the button is released, the welding process is terminated
and the post-Gas function is activated.
tiG dc liFt
4-stroke
N-coder
method switching button
2/4 stroke control button
Mig/MAg
- Welding method setting - welding machine
use the method switch button to select the miG/maG method. subse
-
quently, the entire welding process control moves to the control located in
the wire feeder - the machine control panel becomes inactive.
miG/maG method
Mig/MAg
- Welding process settings
Pulse
- in pulsed arc welding, the base current alternates regularly with the
increased pulse current, resulting in a liquefied welding bath. this is a preset
controlled process. the user can make corrections to the welding process. the
process is particularly suitable for al and crNi materials and welding thinner
sheets.
Double Pulse
- in double pulse welding, the pulse arc alternates regularly
in two sequences, reducing the thermal stress of the welded material and
the aesthetic standards similar to the tiG method. this is a preset controlled
process. the user can make corrections to the welding process. the process
is particularly suitable for al and crNi materials and welding thinner sheets.
Manual
- the user must set the welding parameters manually. this is a stan
-
dard process, depending on the set parameters, in a short / liquid arc.
Synergic
- this is a preset controlled process. the user can make corrections
to the welding process.
pulse
double pulse
manual
synergic
Mig/MAg
- Adjustment of welding power
Synergic, Pulse and Double Pulse process
- allows adjustment by welding cu
-
rrent / material thickness / wire feed speed. the value is changed using the
n-coder ii. activation is performed by pressing the control n-coder one after
the other.
pulse
double pulse
manual
N-coder ii
Welding current
synergic
