10. - Maintenance and storage
HRB122-152-182
69
KN135HGB_D
Power harrows
Rotor direction of rotation:
(a): HRB 122
(b): HRB 152
(c): HRB 182
- Reassemble the unit.
- Check condition of bolts and nuts. Replace them if
necessary.
• Bolt: Torque: 38 daNm (280 lbf ft).
• Nut.
- Proceed same way on each rotor.
10.5 Storage
10.5.1 At the end of each season
- Clean the machine with a garden hose.
- Grease the cylinder rods in contact with the
outside.
- Check and replace worn or damaged blades.
- Touch up any areas of damaged paintwork.
- Put the machine under cover in a dry place.
- Remove and service the PTO shaft. Follow the
instructions in the PTO shaft operating manual.
10.5.2 At the start of each season
- Re-read the operators' manual.
- Check that all nuts and bolts are sufficiently
tightened.
- Make sure that all protection devices are in place
and in good condition.
- Wipe off grease on cylinder rods.
a
b
c
A7300019 0
