FC244/D/-FF/D-FF
98
10. - Maintenance and storage
KN329CGB_A
Mower conditioner
- Place the machine in working position.
- Stop the tractor engine and remove ignition
key.
The U-joint grease zerks of the intermediate PTO
shaft are accessible through openings 2 on the
guard cones (1):
- If necessary, rotate a disc to access the grease
zerk.
The telescopic tubes are lubricated through a
grease zerk:
- Slide the black collar (2).
- If necessary, rotate a disc to access the grease
zerk.
-
Slide the black collar back in place when
lubrication has been completed.
The grease zerks (3) of the guiding bushes are
directly accessible on the transmission tube.
10.3.2 Oil change
The cutterbar
- Before draining oil, operate the machine for a
few minutes so that the oil warms up.
FC244/D/-FF/D-FF
Oil volume
1.70 L (0.45 US gal)
Type of oil
Mineral oil (Gear oil)
Viscosity
SAE80W90
Specification
API - GL5 (extreme pressure)
When changing the oil, it is recommended to use
either an identical mineral oil or a synthetic oil of
type PAO (Poly-Alpha-Olefine) with viscosity
grade SAE75W90
1
1
2
3
3
