FC244/D/-FF/D-FF
62
7. - Instructions for transport
KN329CGB_A
Mower conditioner
7.2
Conformity with the road
regulations
- Check that the signalling panel is clean and that
the lighting equipment functions before going on
public roads.
- Before driving onto a main road, ensure that upper
edge of signalling panel is not more than
1.5 m (4’11’’) from the ground.
Pressure given on the gauge must be below
140 bar (2031 psi).
Never engage the tractor PTO drive when the
machine is in transport position.
If the intermediate PTO shaft torque limiter
has become very hot due to slippage, wait for
it to cool down before pivoting the machine
into transport position.
Before driving the machine on public roads,
ensure that the machine complies with
current highway code regulations.
If the machine is adjusted for wide spreading,
completely fold the right swath shield
inwards underneath the conditioning hood to
reduce the machine dimensions.
Immediately replace any worn or damaged
signalling panels or lights.
